If you attach your monitor to an adjustable arm, your workstation can be transformed and you can precisely position your screen(s) in a variety of orientations. Changing from a seated to a standing workstation is as simple as rotating your screen, moving it up and down, and adjusting the viewing angle for optimal comfort.
In addition to reducing eye strain and other discomforts that come from long hours at the computer, your desk is freed from a clunky monitor base, giving you more workspace. The dual monitor arm gives you additional flexibility and allows you to place the edge of the screen to the edge for an immersive viewing experience.
This list includes only monitor arms that are VESA-compatible. In other words, the “VESA standards” are standardized measurements that allow you to connect your monitor to different kinds of mounting devices. Almost all monitors on the market meet these standards, but you should always double-check your monitor’s model and make sure it meets these requirements.
Wirecutter Monitor Arm Reviews:
No products found.
- ULTRA WIDE LONG ARM- with ultra wider and longer arm fits most monitors from 22''-35'' monitors with load capacity within 6.6~ 26.4 lbs (3-12KG), Perfect solution for deeper desktops
- VESA-COMPLIANT PATTERNS 75x75mm or 100x100mm; While the whole VESA Plate of this product is 118*118mm,Pls pay special attention to the size of VESA Plate if your monitor are curved monitor, Or your VESA hole is inside a recession area.
- EASY INSTALLATION Supports clamp or Grommet hole installation, C clamp works great on desk thicknesses within 3.54” (90mm), while Grommet mounting fits hole diameter from 0.39 to 1.97”(10-50mm), Integrated cable management conceals inside provide clean, neat and clutter-free appearance, maximum ergonomic comfort to relieve eye, neck, and back strain.
- WIDE RANGE ADJUSTMENTS Built-in with ultra-precision gas-strut, Support: +85° to -30° screen tilt adjustment, 360° rotation for landscape or portrait mode; Upright lift 13.5" (345mm) and +90° to -90° degrees swivel, Hold your monitors on a full motion to saves your valuable space
- USB HUB PRE-INSTALLED Built-in USB hubs in the base provide an easy way to charge your USB devices without using valuable desk space, note: Pls DON'T adjust the tension screw without the monitor on it, Adjust method: If the monitor keep rising up, Pls reduce the tension(to the direction of "-") On the contrary, Turn to "+"
- Increased Stability for Heavier Monitors - The upgraded base, built-in premium gas spring and large arms make this dual monitor mount more stable so it can securely hold two 13”-35” screens weighing up to 26.4lbs. Compatible with VESA 75x75mm and 100x100mm.
- Longer and Taller Arms - This computer monitor stand comes with enlarged arms that extend up to 25.6" which is perfect for deeper, larger desktops. It can be easily raised up to 21", providing you with more comfortable height adjustment.
- Full Motion Adjustments - This gas spring dual monitor stand allows your screens to swivel from -90° to +90°, tilt from -30° to +85° and rotate 360°. Conveniently set your monitors at an optimal angle to increase productivity and comfort.
- Increased Stability & Convenience - The enlarged base and sturdy construction ensure superb stability. Supports both clamp and bolt-through grommet mounting for desk thicknesses up to 3.54". The hole for grommet mounting should be 0.39" to 1.97" in diameter; the built-in USB port provides an easy way to charge your USB devices.
- Perfect Desk Organizer - This monitor desk mount holds 2 monitors on 1 stand up off your desktop freeing up much more valuable space on your desk. The integrated cable management system keeps your cords in order and out of sight. Now your workspace is clutter-free!
- Increase Comfort & Productivity - This dual monitor stand raises monitors to eye level, improving posture, relieving strain on neck & shoulders while increasing productivity levels.
- Install In 10 Min or Less - The 1-piece gas spring arm simplifies the assembly. You just need to choose the proper mounting base and mount the monitors. The setup can be completed in 10 min or less.Comes with both C clamp and grommet kits, this stand fits desks with or without a hole. Both of C clamp and grommet mounting fit desk thickness up to 3.74”.
- Optimize Your View and Workstation - The stand allows your monitor to swivel, tilt and rotate. Freely set your monitors to customized angle and position while saving up much valuable space on your desktop.
- Hold Your Monitor Stably - The solid construction and stable clamp/grommet base provide stable and secure holding for your monitors.
- Fit Your Monitors - Widely fit two 17" to 27" flat / curved monitors with Vesa pattern 75x75 and 100x100 from various brands; Each arm holds 4.4lbs to 14.3lbs.
- Premium desk monitor mount, vesa mount - for a clean and organized workspace. EVEO Monitor arm quickly cuts down on unnecessary clutter and increases valuable surface space by raising your monitor above your desktop. Our innovative Monitor Mount is VESA-compatible, screens up to 32 inches or 17.6 lbs for each monitor arm. VESA compatible 100x100 or 75x75 millimeters.
- 5 minutes installation - monitor mount Easy to Install - Don’t worry about having to call your coworker or your friends for help - our monitor desk mount is designed so it can be easily installed by yourself in less than 5 minutes. EVEO Monitor Mount sets up easily and can be attached to your screen in two different ways, either by desk clamp (up to 2 inches thick) or by grommet (up to 2 inches thick) for you max convenience.
- Have it Your Way - EVEO premium vesa mount, monitor mount comes with a removable arm and spring system allowing you to perfectly position your screen on the vesa mount. With EVEO Monitor arm You will always have the right viewing angle for you, with 360 ° rotation and Swivel of +90° ~ -90° . For an extra customization, the arm extends up to 23.5” horizontally and 17.5" vertically with a tilt range of 90 ° back and 90° forward. EVEO monitor stand provides a full range of motion.
- Ergonomic support - Most Monitor Stands are far too low, forcing you to spend your entire working day with a crooked neck. With EVEO Monitor Mount the perfect angle is maintained between your monitor and your eyes, support your neck by aligning your spine at the ergonomic right position. EVEO single monitor mount is Super sturdy and flexible computer monitor mount.
- Quality worth Purchasing – Enjoy EVEO Monitor Arm and monitor arm anytime you need. Your satisfaction is our top priority. We stand behind the quality of our products and that’s why, you shouldn’t be worrying at all. We manufacture the High Quality Monitor Arm for PC, monitor stand and computer monitor accessories.
- ☑UNIVERSAL: Fits Most 17'' - 30'' Monitor with the load from 4.4 lbs up to 19.8 lbs, VESA compliant 75×75mm 100×100mm,while, The whole VESA Plate is 118*118mm, Extra Longer Screw & Screw spacer may be needed if your VESA hole is inside a recession area. Pls noted that VESA plate part support 360-degree rotation(Rotate it to right position as needed)
- ☑FULLY ADJUSTABLE: The durable gas spring system ensure easy positioning of your monitor in any desirable position; Personalize your workstation any way you want; Support C-clamp or Grommet installation, Heavy-duty construction and super quality materials keep your arm mount stable-This is the sturdiest desk mount on the market.
- ☑FULL MOTION: A Wide range of movements, The monitor can be rotated and tilted effortlessly in any direction, Tilt Angel from -30 degrees to +85 degrees with a combined 360 degree landscape VESA Part Rotations, Upright range is 10''(260 mm) with swivel angel ±90 degrees
- ☑ERGONOMICS: Improve your overall well-being by creating the most comfortable viewing angle for work or gaming-Enjoy the freedom to adjust your monitor height and angle: Your spine, neck, and shoulder will be thankful
- ☑EASY INSTALLATION: Comes with detailed instruction and all needed hardware, the monitor stand is very easy to installation within ten mins by one person, Hidden cable management keeps your desktop neat and organized. Pls, DON'T adjust the tension screw without the monitor mounted on it.
- Strong steel arm mounts screen conveniently free up desk space. Hold one 13-32" monitor with a max load capacity 22lbs.
- Fits monitors with 75x75mm or 100x100mm VESA size (distance of 4 mounting holes on the back of the monitor).
- Feature ±80 tilt, ±90 swivel and 360 rotation, 400mm height adjustable for optimum viewing angle.
- Two installation methods: c-clamp and grommet base provide you different options in different circumstances. C-clamp can be mounted to desk up to 3.86inch thickness. Grommet base requires holes with at least 1.65inch diameter.
- Comes complete with instructions plus all accessories needed for simple installation. Gift: tablet stand
- 【UPGRADE MONITOR ARM】 HUANUO monitor desk arm perfectly fits most LCD LED flat or curved computer screens up to 35 inches, holds 4.4-26.4lbs, suitable for VESA patterns of 75x75mm & 100x100mm. Compatible with different sizes of computers screens, including but not limited to 35 32 30 28 27 25 24 23 22 21 20 19 17 inch screen
- 【FULL MOTION MONITOR STAND】 A Wide range of movements, tilt: -30° to + 85°, rotation:360°, swivel angel 180°. Extended reinforced detachable arm, suitable for wider table, arms can be extended up to 21", height adjusted up to 20.5". Set your monitors to customized angles and positions freely while saving up much valuable space on your desktop
- 【USB MANAGEMENT INTEGRATION】 The monitor mount has USB connectors with cable management, solves cable clutter, improves comfort level, and supports bad cable replacement. Use a hidden adjustment hole to avoid daily dust, not only has a beautiful design, and is easy to clean
- 【EASY TO ASSEMBLE】 The 1-piece gas spring arm simplifies the assembly. You just need to choose the proper mounting base and mount the monitors. The setup can be completed in 10 min or less. Comes with both C clamp and grommet kits, this stand fits desks with or without a hole. C clamp fit desk thickness up to 3.5", grommet mounting fit desk thickness up to 3.9"
- 【COMFORTABLE ERGONOMICS】 This single monitor stand raises monitors to eye level, improving posture, and relieving strain on the neck & shoulders while increasing productivity levels and comfort, increasing office space flexibly
- Compatible with the latest ultrawides: Fits large, single screens up to 49 inches and 28 to 42 pounds like the Samsung Odyssey G9 Gaming Monitor; compatible with VESA patterns 75x75mm and 100x100mm
- Everything you need: Includes arm, extension; HD pivot, mounting hardware, two-piece desk clamp for surface edges 0.4 to 2.6 inches thick and grommet mount for installation through a surface hole
- Freedom to move: Offers full range of motion with 11.5 inches of lift, screen rises 17.8 inches from the worksurface; customize how you work or play at your workstation with 360 degrees of rotation and 20 degrees of tilt
- Immersive views: Gives gamers and office professionals flexibility to move large, curved screens to the best location; reclaims more workspace by replacing bulky monitor bases
- Built to last: Extensive quality testing ensures your display stays stable and secure; Ergotron products set the standard for quality with a 10-year warranty and expert technical support
- Broad compatibility: Fits single screens up to 34 inches diagonal and 7 to 25 pounds; compatible with VESA patterns 75x75mm and 100x100mm
- Versatile mounting options: Includes two-piece desk clamp and grommet mount to fit a variety of desk types; desk clamp attaches to desks 0.4 to 2.4 inches thick; grommet mount attaches through a surface hole to desks up to 2.25 inches thick
- Improved comfort: Easily raise your monitor up to 17.3 inches above your worksurface with 13 inches of lift; find your best view for each project with 360 degrees of rotation and 75 degrees of tilt
- Sleek and modular design: Designed with aesthetics in mind to enhance your workspace, built-in cable management creates a streamlined look; a suite of compatible accessories lets you customize your work or gaming space
- Built to last: Extensive quality testing ensures your monitor stays stable and secure; Ergotron products set the standard for quality with a 10-year warranty and expert technical support
- 【FITS 13" TO 34" SCREEN】Single monitor desk mount fits most of flat/curved/ultrawide computer monitors up to 20 lb in weight with VESA 75x75mm or 100x100mm mounting holes.
- 【SAVE VALUABLE SPACE】Heavy-duty metal base only take up 4" x 3.7" desk surface. The c-clamp and grommet mounting options support up to 3.3" desk thick.
- 【ERGONOMIC VIEWING HEIGHT】Premium gas spring monitor arm assists height adjustment from 6.7" to 20", which passes 16,000-cycle motion test. Adjusting the monitor adapts to your posture by arm extension, vertical tilt, horizontal swivel, and landscape or portrait rotation.
- 【DISCOVER PRODUCTIVE SELF】After locking a few screws, the monitor mount instantly improve working posture, increase workspace, and hide cables.
- 【RESPOND WITHIN 24HRs】Friendly tech support to help with any questions or concerns. AVLT-DM03-1 is covered by 3-YEAR MANUFACTURER WARRANTY and LIFETIME TECH SUPPORT.
- Fits 13" To 27" Screens - Dual monitor mount fitting two screens 13” to 27” in size and 22 lbs in weight each with VESA 75x75mm or 100x100mm backside mounting holes.
- Articulation & Height Adjustment - Adjustable arm offers +90° to -90° tilt, 180° swivel, 360° rotation, and height adjustment along the center pole. Monitors can be placed in portrait or landscape orientation.
- Heavy Duty C-Clamp - Mounts to the back of your desk (up to 4” thick) via a heavy-duty C-clamp or optional grommet mount.
- Integrated Cable Management - Keep your power and AV cables clean and organized with detachable cable clips on the arms and center pole.
- Easy Installation - Mounting your monitors is a simple process with detachable VESA bracket plates. We provide the necessary hardware and instructions for assembly.
What You Need To Know
In addition to being highly adjustable, monitor arm stands offer a lot more flexibility than freestanding mounts that come with most monitors. Many monitor stands cannot be adjusted up and down like monitor arms can. Monitor’s arms are able to be adjusted towards or away from you as well.
We recommend the Ergotron LX monitor arm if you’re looking for the highest degree of adjustability. This monitor arm boasts Constant Force technology, which is smooth and stays put even when you aren’t adjusting it.
Varidesk’s dual monitor arm is the best dual monitor stand for adjustability. With this mount, you can rotate and pivot 360 degrees and adjust its height and reach to fit your needs.
Size and weight limit
A monitor mount’s weight limit is another thing to keep in mind. In spite of the fact that most of the mounts on our list have comparable maximum weights, it’s still important to make sure the monitor won’t strain your arm too much before you buy it.
There are also specific limitations on the size of the arms on some of the two monitor models. Therefore, dual-arm models might not work well with some monitor sizes, like ultrawide monitors. If your monitors don’t exceed the weight limit, be sure that they will fit on the arms.
Monitor arms can improve ergonomics, which is one of their strongest benefits. Here are some guidelines developed by Professor Alan Hedge and Cornell University to help you set up your monitor arm.
When you hold out your arm at shoulder level, the center of your monitor should align with your middle finger.
Are monitor arm mounts worth it?
A monitor arm or mount will be useful to anyone who works at a computer for hours on end. When using dual, multi, or curved monitors, users have total control over the visual display of their work, resulting in greater productivity.
Do monitor arms shake?
Monitor arms usually rise from a post or gas arm system, as you can see in the design. Monitors will bounce and shake more if they are moved from where they are mounted. When you purchase a cheap, flimsy monitor arm, you will notice this problem more than if you purchase a high quality product.
How do I stop my monitor from shaking at my desk?
If the damping shim under the monitor does not work, a towel or rubber pad beneath the monitor may work as a dampening shim. The mass of the desk is essential to reduce the wobble to a point where the foam rubber pad or towel can control the remaining wobble. If you are unable or unwilling to mount the monitor on the wall, you can add mass to the desk.
Can monitors be wall mounted?
All monitors are mountable, so the answer is yes. A wall mount may be attached directly to the wall, and then have an arm that can be positioned in any position.
Do monitor arms work with any monitor?
The mounting bracket and size specifications are also crucial. Today, most monitors and monitor arms are VESA mount compatible, but be sure to check their specs before buying.
Moreover, many people today consider curved screens only useful for gaming.
As a result, large corporations are beginning to use these screens to work on several windows or group projects, designs, and information, or to monitor everything at the same time. This is a worthwhile investment.
Due to these characteristics, you should have no difficulties selecting the best screen for you, whether you’re a gamer or a professional seeking a high-quality screen.